Cape Sleeve for Glass Handlers
with Cut and Puncture Protection
|
|
Description
Tri-Star Glove cape sleeves for installers that provides both cut and puncture protection. The cape is constructed with black Polyester that provides a breathable fabric in the front and back for installer comfort. The cape includes brass snaps in the front for a secure closure and safety.
The cut and puncture resistant sleeves are constructed with Norfab® fabric plus has a second layer of the same fabric for additional protection. The cut resistant rib cuffs are constructed with Twaron® and Lycra® yarn with a well-designed thumbhole for safety. The stripes are sewn on with reflective 3M material.
The cut and puncture resistant sleeves are constructed with Norfab® fabric plus has a second layer of the same fabric for additional protection. The cut resistant rib cuffs are constructed with Twaron® and Lycra® yarn with a well-designed thumbhole for safety. The stripes are sewn on with reflective 3M material.
technical specifications
Constructed with CutPro® Vintage #366 - Cut and Puncture Data
Puncture Resistance: EN 388 (N) = 83
Puncture Resistance: ANSI/ISEA 105-2011 = Level 3
Cut Performance Test: ASTM 1790-05, CPPT (g.) = 3129
Cut Resistance: ANSI-ISEA 105-2011 = Level 4
Abrasion Resistance Test: Taber; H18 wheel; 500 g. wt = 600 cycles
Caution: This garment should not be worn in areas where flame or high heat is present.
Puncture Resistance: EN 388 (N) = 83
Puncture Resistance: ANSI/ISEA 105-2011 = Level 3
Cut Performance Test: ASTM 1790-05, CPPT (g.) = 3129
Cut Resistance: ANSI-ISEA 105-2011 = Level 4
Abrasion Resistance Test: Taber; H18 wheel; 500 g. wt = 600 cycles
Caution: This garment should not be worn in areas where flame or high heat is present.
product details
Product number: TSG-842-1
Cape sleeves are available in sizes small through 4XL.
Cape sleeves are available in sizes small through 4XL.