TSG-324 Cut Protective Glove
TSG-324
PRODUCT DESCRIPTION:  
  • 7 Gauge Terry Cloth Knit Glove Loop-Out
  • 100% virgin Twaron® and Nylon in the Loop 
  • Poly/Cotton Inside
  • Reinforced tip-to-tip with Twaron® Premium Line and Stainless Steel.
  • Heavy Weight
  • Seamless and Reversible
  • 3.5" Cuff with Overcast Edge
  • Ships within 1 - 5 days

  • Will Not Burn, Melt or Drip
  • Inherent Flame Resistant
  • Sold by the Dozen
  • 6 Dozen per Case
The TSG-324 is made with 100% virgin Twaron® and nylon to resist abrasion and offer cut value.  The loop out feature greatly assists in the abrasion performance.  It is launderable, providing cost savings opportunities.  Cuffs are color coded by size for easy identification and visual compliance.  
​
Recommended:  For areas where low cut and high abrasion protection are required. .  It has been a proven solution for many years in the automotive industry, specifically where the team members uses a sanding stone to remove burrs.
ASTM F1790-04
Cut Level 3
​1019.6 grams​
EN388
Abrasion Level 7500 Cycles
Available Sizes and Cuff Colors
Small
Medium
Large
XL
Yellow
Green
White
Grey
If you need a size not listed, just ask!
It's our Job to Communicate and Educate:
  • Twaron® is a para-aramid similar to Kevlar, but has better cut and abrasion.
  • Twaron® is an inherent flame resistant (IFR) yarn which means the protective properties are inherent to the fiber, will not burn, melt, or drip, and you cannot launder out those protective properties.​
  • If your process creates a specific threat to your team members, and need advice on which glove will protect them from that threat, we are here to help.