Tri-Star Glove
  • TSG / KCARC Partnership Announcement
  • Home
  • About
  • IFR Face Masks
    • How to Wear a Mask
  • Gloves
    • Choose Your Glove by Cut Level >
      • A2 Cut Level
      • A3 Cut Level
      • A4 Cut Level
      • A5 Cut Level
      • A6 Cut Level
      • A8 Cut Level
      • A9 Cut Level
    • Thermal Protective Gloves
    • New ANSI Cut Levels
  • Low Lint Products
    • Low Lint Paint Gloves
    • Low Lint Paint Gloves with Cut Protection
    • Low Lint Anti-Static Paint Glove
    • Low Lint Paint Sleeve
    • Low Lint Paint Sleeve with Cut Protection
    • Low Lint Watch Covers
  • Cut and Puncture Protection
    • Garment Systems
    • Capes, Aprons, and Pants >
      • TSG-842-1 Cape Sleeve
      • TSG-785 Cape Sleeve
      • TSG-1111-2 Cape Sleeve
      • TSG-429 Over Pants
    • Sleeves and Specialty Items
  • Welding
    • Welding Capes and Bibs
    • Welding Jackets
    • Welding Aprons and Sleeves
    • Welding Pants and Bib Overalls
  • Molten
    • Primary Layer - Aluminized
    • Secondary Layer
  • Value Add
  • Technical
  • Contact Us
    • Watch Us Make Your Garment!
  • Employment Opportunities

TSG-482, TSG-483, and TSG-484
with Cut and Puncture Protection

TSG Glass Garments - PPE for glass industry
TSG glass garments - PPE for glass industry
Description
TSG-482 Series Ike Jacket with CutPro™ #371 fabric
  • Includes a 360 degree collar with hook and loop closure for a secure and proper fit.
  • Twaron® blend ribbed cuffs with thumb-holes for safety.
  • Mesh back panel helps with a comfortable air flow.
TSG-483 Series Chaps with CutPro™ #371 fabric
  • Made with a one-piece front panel alleviating snags on seams and metal grommets.
  • Each leg includes three 1" wide elastic straps with two above the knee and one below the knee for maximum leg protection.
  • A rear hook and loop closure is included for the lower leg.
  • Brass snaps are on the inside of the chaps to prevent product scratches.
TSG-484 Series Bib with CutPro™ #371 fabric
  • Available in 16" and 18" lengths.
  • The TSG-484 bib attaches with brass snaps to the TSG-483 chaps for safe coverage and to prevent product scratches.
  • An effective, cost-saving garment when used as part of the complete system.
technical specifications
Constructed with CutPro® Natural #371 - Cut and Puncture Data

Cut Resistance - ASTM F2992-16 
Cut Level A4

Puncture Resistance - EN388-03
Level 4

Abrasion Resistance Test: ASTM D3884-09
Level 2
product details
Product number:
TSG-482 series jacket is available in sizes small - 6XL.
TSG-483 series chaps are available in sizes small - 6XL.
TSG-484 series bib is available in 16" and 18".

Norfab #371 Fabric Spec Sheet
 Proudly Made in the U.S.A. | 800-832-7101
customerservice@tri-starglove.com
  • TSG / KCARC Partnership Announcement
  • Home
  • About
  • IFR Face Masks
    • How to Wear a Mask
  • Gloves
    • Choose Your Glove by Cut Level >
      • A2 Cut Level
      • A3 Cut Level
      • A4 Cut Level
      • A5 Cut Level
      • A6 Cut Level
      • A8 Cut Level
      • A9 Cut Level
    • Thermal Protective Gloves
    • New ANSI Cut Levels
  • Low Lint Products
    • Low Lint Paint Gloves
    • Low Lint Paint Gloves with Cut Protection
    • Low Lint Anti-Static Paint Glove
    • Low Lint Paint Sleeve
    • Low Lint Paint Sleeve with Cut Protection
    • Low Lint Watch Covers
  • Cut and Puncture Protection
    • Garment Systems
    • Capes, Aprons, and Pants >
      • TSG-842-1 Cape Sleeve
      • TSG-785 Cape Sleeve
      • TSG-1111-2 Cape Sleeve
      • TSG-429 Over Pants
    • Sleeves and Specialty Items
  • Welding
    • Welding Capes and Bibs
    • Welding Jackets
    • Welding Aprons and Sleeves
    • Welding Pants and Bib Overalls
  • Molten
    • Primary Layer - Aluminized
    • Secondary Layer
  • Value Add
  • Technical
  • Contact Us
    • Watch Us Make Your Garment!
  • Employment Opportunities