Sizes Available
- Size Small to 5XL
- Additional Sizes Available Upon Request
In Stock & Ready to Ship
TSG-1120-3 Hi-Vis IFR Cape Sleeve with Cut and Puncture Protection
Best Seller
Attach a snap-on bib to make it a PPE “System”.
ASTM F2992-15
1018 grams
EN388:2016
Product Type
Cape Sleeves
| Front | 7oz Barrweld™ Lite Royal Blue (60% LenzingFR / 40% Twaron) Inherent Flame Resistant (IFR) Engineered to Shed Weld Splatter and Resist Pin Holes Will Not Burn, Melt, or Drip |
| Back | 5.7oz IFR Hi-Vis Yellow Modacrylic/Aramid Mesh Back HRC1 4.6 Tested to ASTM F1506 and NFPA 70E High Arch for Comfort in Hotter Weather |
| Sleeves | 7oz Inherent Flame Resistant (IFR) TS600 Heather Black Twaron® Engineered Woven Fabric Feels Cool to the Touch Cut level A3, Puncture Level 2, HRC1 7.8 Cal |
| Cuff | Black Twaron® Knit Wrist with Thumb Hole Locks the sleeve in place when donning a glove so it does not ride up the arm and expose the vulnerable wrist Cut Level A2 (518 Grams) |
| Closure | Black Snap Vertical Closure |
| Horizontal Snaps | Horizontal black snaps for bib attachment |
| Mic Loop(s) | Mic Loop on Right Shoulder |
| Striping | 3M Retro-Reflective Yellow/Silver/Yellow Segmented Vertical Stripes on the Front |
In Stock & Ready to Ship
TSG-1120-3 Hi-Vis IFR Cape Sleeve with Cut and Puncture Protection
Best Seller
Attach a snap-on bib to make it a PPE “System”.
ASTM F2992-15
1018 grams
EN388:2016
Product Type
Cape SleevesCape Sleeves
| Front | 7oz Barrweld™ Lite Royal Blue (60% LenzingFR / 40% Twaron) Inherent Flame Resistant (IFR) Engineered to Shed Weld Splatter and Resist Pin Holes Will Not Burn, Melt, or Drip |
| Back | 5.7oz IFR Hi-Vis Yellow Modacrylic/Aramid Mesh Back HRC1 4.6 Tested to ASTM F1506 and NFPA 70E High Arch for Comfort in Hotter Weather |
| Sleeves | 7oz Inherent Flame Resistant (IFR) TS600 Heather Black Twaron® Engineered Woven Fabric Feels Cool to the Touch Cut level A3, Puncture Level 2, HRC1 7.8 Cal |
| Cuff | Black Twaron® Knit Wrist with Thumb Hole Locks the sleeve in place when donning a glove so it does not ride up the arm and expose the vulnerable wrist Cut Level A2 (518 Grams) |
| Closure | Black Snap Vertical Closure |
| Horizontal Snaps | Horizontal black snaps for bib attachment |
| Mic Loop(s) | Mic Loop on Right Shoulder |
| Striping | 3M Retro-Reflective Yellow/Silver/Yellow Segmented Vertical Stripes on the Front |
Sizes Available
- Size Small to 5XL
- Additional Sizes Available Upon Request
Additional Information
- Launderable
Request a Quote
Request Samples
TSG-1120-3 Marketing Sheet
Barrweld Lite Fabric Spec Sheet
TS600 Twaron Engineered Fabric Spec Sheet
Barrweld Lite Laundry Instructions
Modacrylic/Aramid Mesh Fabric Spec Sheet
Variations
Add a snap-on bib made using the same high-performance TS600 Twaron® Engineered fabric to make a Cape Sleeve “System”.
Available in 18″, 24″ & 30″ lengths – Order using TSG-1112 + length.We can customize this cape specific to your company and your process. Contact us using the email link at the bottom of this page.