Tri-Star Glove
  • TSG / KCARC Partnership Announcement
  • Home
  • About
  • IFR Face Masks
    • How to Wear a Mask
  • Gloves
    • Choose Your Glove by Cut Level >
      • A2 Cut Level
      • A3 Cut Level
      • A4 Cut Level
      • A5 Cut Level
      • A6 Cut Level
      • A8 Cut Level
      • A9 Cut Level
    • Thermal Protective Gloves
    • New ANSI Cut Levels
  • Low Lint Products
    • Low Lint Paint Gloves
    • Low Lint Paint Gloves with Cut Protection
    • Low Lint Anti-Static Paint Glove
    • Low Lint Paint Sleeve
    • Low Lint Paint Sleeve with Cut Protection
    • Low Lint Watch Covers
  • Cut and Puncture Protection
    • Garment Systems
    • Capes, Aprons, and Pants >
      • TSG-842-1 Cape Sleeve
      • TSG-785 Cape Sleeve
      • TSG-1111-2 Cape Sleeve
      • TSG-429 Over Pants
    • Sleeves and Specialty Items
  • Welding
    • Welding Capes and Bibs
    • Welding Jackets
    • Welding Aprons and Sleeves
    • Welding Pants and Bib Overalls
  • Molten
    • Primary Layer - Aluminized
    • Secondary Layer
  • Value Add
  • Technical
  • Contact Us
    • Watch Us Make Your Garment!
  • Employment Opportunities

TSG-258 Low Lint Paint Sleeve
​with Cut Protection
Picture
TSG-258
Picture
TSG-258
  • ​7 Gauge
  • 100% virgin Twaron® ​Para- Aramid Filament 
  • Yellow with Green ID
  • ​Medium Weight
  • ​Silicone Free
  • "14", 16" & 19" Lengths
  • ​Launderable​
Description:
​The distinctive yellow with green identification provides visual compliance as well as a sharp contrast to industry automotive products and better particulate identification for quality control.

The sleeve is a mutilation countermeasure for specific tasks that may expose the forearm when the arms are extended.  It was also designed to contain loose-fitting sleeves to avoid marring.

​The upper and wrist cuffs are overcast using a thermal heat-set yarn to minimize errant particulate.

​The cuffs have directional specific colors.  The upper arm is gray and the wrist is yellow.

​This sleeve has proven itself over many years in the automotive industry.​
Picture
ASTM F1790-04
870.9 Grams
Cut Level 2

Based on Third Party Testing
EN388
800 Cycles
Abrasion Level 2

​Based on Third Party Testing
Packaged 10 per Sealed Bag
Available Sizes with Cuff Colors
TSG-258-14
TSG-258-16
TSG-258-19
14"
16"
19"
Marketing Sheet
Summary of Low Lint Products
Request a Sample
Picture
 Proudly Made in the U.S.A. | 800-832-7101
customerservice@tri-starglove.com
  • TSG / KCARC Partnership Announcement
  • Home
  • About
  • IFR Face Masks
    • How to Wear a Mask
  • Gloves
    • Choose Your Glove by Cut Level >
      • A2 Cut Level
      • A3 Cut Level
      • A4 Cut Level
      • A5 Cut Level
      • A6 Cut Level
      • A8 Cut Level
      • A9 Cut Level
    • Thermal Protective Gloves
    • New ANSI Cut Levels
  • Low Lint Products
    • Low Lint Paint Gloves
    • Low Lint Paint Gloves with Cut Protection
    • Low Lint Anti-Static Paint Glove
    • Low Lint Paint Sleeve
    • Low Lint Paint Sleeve with Cut Protection
    • Low Lint Watch Covers
  • Cut and Puncture Protection
    • Garment Systems
    • Capes, Aprons, and Pants >
      • TSG-842-1 Cape Sleeve
      • TSG-785 Cape Sleeve
      • TSG-1111-2 Cape Sleeve
      • TSG-429 Over Pants
    • Sleeves and Specialty Items
  • Welding
    • Welding Capes and Bibs
    • Welding Jackets
    • Welding Aprons and Sleeves
    • Welding Pants and Bib Overalls
  • Molten
    • Primary Layer - Aluminized
    • Secondary Layer
  • Value Add
  • Technical
  • Contact Us
    • Watch Us Make Your Garment!
  • Employment Opportunities