Tri-Star Glove
  • TSG / KCARC Partnership Announcement
  • Home
  • About
  • IFR Face Masks
    • How to Wear a Mask
  • Gloves
    • Choose Your Glove by Cut Level >
      • A2 Cut Level
      • A3 Cut Level
      • A4 Cut Level
      • A5 Cut Level
      • A6 Cut Level
      • A8 Cut Level
      • A9 Cut Level
    • Thermal Protective Gloves
    • New ANSI Cut Levels
  • Low Lint Products
    • Low Lint Paint Gloves
    • Low Lint Paint Gloves with Cut Protection
    • Low Lint Anti-Static Paint Glove
    • Low Lint Paint Sleeve
    • Low Lint Paint Sleeve with Cut Protection
    • Low Lint Watch Covers
  • Cut and Puncture Protection
    • Garment Systems
    • Capes, Aprons, and Pants >
      • TSG-842-1 Cape Sleeve
      • TSG-785 Cape Sleeve
      • TSG-1111-2 Cape Sleeve
      • TSG-429 Over Pants
    • Sleeves and Specialty Items
  • Welding
    • Welding Capes and Bibs
    • Welding Jackets
    • Welding Aprons and Sleeves
    • Welding Pants and Bib Overalls
  • Molten
    • Primary Layer - Aluminized
    • Secondary Layer
  • Value Add
  • Technical
  • Contact Us
    • Watch Us Make Your Garment!
  • Employment Opportunities

TSG-990 Series IFR BARRWELD™ Jacket
with IFR BARRWELD™ Extreme Sleeves

Click on photos to enlarge.
Product Description
The TSG-990 jacket is made with Inherent Flame Resistant (IFR) BARRWELD™ in wine color on the front and back panels.

The sleeves are made with IFR BARRWELD Extreme™in black and a IFR BARRWELD™ patch in wine color on inside to retard thermal transfer.

It includes a regular collar and two inside pockets.

The zipper is made of brass / NOMEX® tape.
​
The Twaron® blend ribbed cuffs include thumb-holes for safety.

A FR hook and loop closure in beige is on the flap to cover the zipper.
technical specifications
​TSG-990 Series with standard collar

BARRWELD™ Extreme
  • ​Sample Dry Weight (oz/ sq yd) =  9.9
  • Thickness (mm) = 0.59
  • Finish = None
  • Dimensional Change (% shrinkage)
    *AATCC 135-204, 140F, Tide, Center Post Washer +Dry 5x Cycles (Warp x Weft), *NFPA 1971 = 7.1 x 4.7
  • Thermal Shrinkage (Warp x Weft) (% shrinkage) = 1.2 x 0.3
  • Tabor Abrasion (Cycles) (H18/500g)-Total = 578
  • Fabric Break, Grab (lbf )-Warp x Weft = 557.1 x 440.2
  • Fabric Elongation, Grab (lbf )-Warp x Weft 
    *AATCC 135-2004, NFPA 1971 = 25.1 x 10
  • After Flame (sec.)-Warp x Weft = 0 x 0
  • After Glow (sec)-Warp x Weft = 2.4 x 4.0
  • Char Length (mm)-Warp x Weft = 0
  • Single Layer Heat Flux
    Time to Burn (sec) = 4.3
    TPP Value (cal/cm2) = 8.6
    FFF Value ((cal/cm2) / (oz/yd2)) = 0.9

BARRWELD™ 
  • 40% Twaron/60% Lenzing FR Rayon blend
  • Weight (+/- 5.0%) and weave = 8.5 oz (sq. yd) twill
  • Thickness (inch.) = 0.02 - 0.026
  • Thermal protective performance (cal/cm2) NFPA 1971 (with spacer) = 14
  • Thermal protective performance (cal/cm2) NFPA 1971 (with spacer) after five cycles of washing = 16
  • Cut resistance EN 388 = 1, CPPT ASTM 1790-05 (g) = 365
  • Tensile strength (lbs [w x f]) ASTM 1424 (min) = 298 x 160
  • Vertical flammability ASTM 6413-99
    Char length (inches [w x f]) = 0.7 x 0.6
    After flame (seconds [w x f]) = 0.0 x 0.0
  • Color availability = wine
  • Washing colorfastness
    140ºF industrial wash, 160ºF max stack dry [25x] = 4
product details
Product Number: TSG-990 Series
Sizes Available: Small through 4XL.

Please use the following product numbers when ordering:
​TSG-990-S     

TSG-990-M    
TSG-990-L     
TSG-990-XL    
TSG-990-2XL  
TSG-990-3XL 
TSG-990-4XL ​
 Proudly Made in the U.S.A. | 800-832-7101
customerservice@tri-starglove.com
  • TSG / KCARC Partnership Announcement
  • Home
  • About
  • IFR Face Masks
    • How to Wear a Mask
  • Gloves
    • Choose Your Glove by Cut Level >
      • A2 Cut Level
      • A3 Cut Level
      • A4 Cut Level
      • A5 Cut Level
      • A6 Cut Level
      • A8 Cut Level
      • A9 Cut Level
    • Thermal Protective Gloves
    • New ANSI Cut Levels
  • Low Lint Products
    • Low Lint Paint Gloves
    • Low Lint Paint Gloves with Cut Protection
    • Low Lint Anti-Static Paint Glove
    • Low Lint Paint Sleeve
    • Low Lint Paint Sleeve with Cut Protection
    • Low Lint Watch Covers
  • Cut and Puncture Protection
    • Garment Systems
    • Capes, Aprons, and Pants >
      • TSG-842-1 Cape Sleeve
      • TSG-785 Cape Sleeve
      • TSG-1111-2 Cape Sleeve
      • TSG-429 Over Pants
    • Sleeves and Specialty Items
  • Welding
    • Welding Capes and Bibs
    • Welding Jackets
    • Welding Aprons and Sleeves
    • Welding Pants and Bib Overalls
  • Molten
    • Primary Layer - Aluminized
    • Secondary Layer
  • Value Add
  • Technical
  • Contact Us
    • Watch Us Make Your Garment!
  • Employment Opportunities