Sizes Available
- Available in Sizes XS to 5XL
- Additional Sizes Available Upon Request
In Stock & Ready to Ship
TSG-1020-1 Series IFR Barrweld™ Cape with Cut Protective Sleeves
Best Seller
ASTM F2992-15
518 grams
Product Type
Cape Sleeves
| Hazard Risk Category (HRC) | Body is HRC1 - 6.9 Cal Sleeves - Not Yet Tested |
| Front | 8.5oz Barrweld™ Wine (60% LenzingFR / 40% Twaron) Inherent Flame Resistant (IFR) Engineered to Shed Weld Splatter and Resist Pin Holes Will Not Burn, Melt, or Drip |
| Back | 8.5oz Barrweld™ Wine (60% LenzingFR / 40% Twaron) Inherent Flame Resistant (IFR) Engineered to Shed Weld Splatter and Resist Pin Holes Will Not Burn, Melt, or Drip |
| Sleeves | 6.5oz Natural Twaron® Interlock Jersey Cut Level A2 - 518 Grams |
| Cuff | Natural Twaron® Knit Wrist with Thumb Hole Locks the sleeve in place when donning a glove so it does not ride up the arm and expose the vulnerable wrist Cut Level A2 (518 Grams) |
| Closure | Covered vertical snaps provide mutilation protection |
| Horizontal Snaps | Covered Horizontal Snaps for Bib Attachment Provide Mutilation Protection |
In Stock & Ready to Ship
TSG-1020-1 Series IFR Barrweld™ Cape with Cut Protective Sleeves
Best Seller
ASTM F2992-15
518 grams
Product Type
Cape SleevesCape Sleeves
| Hazard Risk Category (HRC) | Body is HRC1 - 6.9 Cal Sleeves - Not Yet Tested |
| Front | 8.5oz Barrweld™ Wine (60% LenzingFR / 40% Twaron) Inherent Flame Resistant (IFR) Engineered to Shed Weld Splatter and Resist Pin Holes Will Not Burn, Melt, or Drip |
| Back | 8.5oz Barrweld™ Wine (60% LenzingFR / 40% Twaron) Inherent Flame Resistant (IFR) Engineered to Shed Weld Splatter and Resist Pin Holes Will Not Burn, Melt, or Drip |
| Sleeves | 6.5oz Natural Twaron® Interlock Jersey Cut Level A2 - 518 Grams |
| Cuff | Natural Twaron® Knit Wrist with Thumb Hole Locks the sleeve in place when donning a glove so it does not ride up the arm and expose the vulnerable wrist Cut Level A2 (518 Grams) |
| Closure | Covered vertical snaps provide mutilation protection |
| Horizontal Snaps | Covered Horizontal Snaps for Bib Attachment Provide Mutilation Protection |
Sizes Available
- Available in Sizes XS to 5XL
- Additional Sizes Available Upon Request
Additional Information
- Launderable
Request a Quote
Request Samples
Barrweld™ Fabric Spec Sheets
Twaron® Interlock Jersey Fabric Spec Sheet
Barrweld Laundering Instructions
Twaron® Interlock Jersey Laundering Instructions
Variations
Available without covered snaps – TSG-1020
Add a snap-on bib made using the same high-performance 8.5oz Barrweld™ fabric to make a Cape Sleeve “System”.
For the Barrweld™ snap-on bib with leather strings, use part number:- TSG-16 – 18″ long
- TSG-29 – 24″ long
- TSG-30 – 30″ long
For the Barrweld™ snap-on bib with removeable 1″ heavy cotton webbing belt, side release buckle, and adjustors, use part number:
- TSG-1021-18 – 18″ long
- TSG-1021-24 – 24″ long
- TSG-1021-30 – 30″ long
We can customize this cape specific to your company and your process. Contact us using the email link at the bottom of this page.