Tri-Star Glove
  • TSG / KCARC Partnership Announcement
  • Home
  • About
  • IFR Face Masks
    • How to Wear a Mask
  • Gloves
    • Choose Your Glove by Cut Level >
      • A2 Cut Level
      • A3 Cut Level
      • A4 Cut Level
      • A5 Cut Level
      • A6 Cut Level
      • A8 Cut Level
      • A9 Cut Level
    • Thermal Protective Gloves
    • New ANSI Cut Levels
  • Low Lint Products
    • Low Lint Paint Gloves
    • Low Lint Paint Gloves with Cut Protection
    • Low Lint Anti-Static Paint Glove
    • Low Lint Paint Sleeve
    • Low Lint Paint Sleeve with Cut Protection
    • Low Lint Watch Covers
  • Cut and Puncture Protection
    • Garment Systems
    • Capes, Aprons, and Pants >
      • TSG-842-1 Cape Sleeve
      • TSG-785 Cape Sleeve
      • TSG-1111-2 Cape Sleeve
      • TSG-429 Over Pants
    • Sleeves and Specialty Items
  • Welding
    • Welding Capes and Bibs
    • Welding Jackets
    • Welding Aprons and Sleeves
    • Welding Pants and Bib Overalls
  • Molten
    • Primary Layer - Aluminized
    • Secondary Layer
  • Value Add
  • Technical
  • Contact Us
    • Watch Us Make Your Garment!
  • Employment Opportunities

TSG-995 Wrist Protector for Glass Handlers
​Cut and Puncture Protection

Click on photos to enlarge.
Product Description
To protect the vital radial artery, Tri-Star Glove introduces the TSG-995 Series of dual layer wrist protectors.

The TSG-995 outer layer is made with Norfab CutPro™ #366 woven fabric, constructed with 100% Twaron® and stainless steel yarn.

The inner layer is woven fabric constructed with 100% Twaron®, providing superior cut and puncture protection.

A hook and loop closure for width adjustment makes for a safe, proper fit of every employee.
technical specifications
TSG - 995 
ANSI/ISEA 105-2011
Level 4 Cut Protection
Level 3 Puncture Protection
Level 2 Abrasion Resistance
Constructed with Norfab #366 - Cut and Puncture Data

Cut Resistance - ASTM F2992-16 
3,064 grams = Cut Level A6

Puncture Resistance - EN388-03
61 N = Level 3

Abrasion Resistance Test: ASTM D3884-09 
(Taber; H18 wheel; 500 g. wt)  600 cycles = Level 2
product details
Product Number: TSG-995
The TSG-995 is available in four sizes of length. Lengths are in one inch increments.
The width has an adjustable hook and loop closure for a proper fit.
  • TSG-995-S
  • TSG-995-M
  • TSG-995-L
  • TSG-995-XL
Norfab #366 Fabric Spec Sheet
 Proudly Made in the U.S.A. | 800-832-7101
customerservice@tri-starglove.com
  • TSG / KCARC Partnership Announcement
  • Home
  • About
  • IFR Face Masks
    • How to Wear a Mask
  • Gloves
    • Choose Your Glove by Cut Level >
      • A2 Cut Level
      • A3 Cut Level
      • A4 Cut Level
      • A5 Cut Level
      • A6 Cut Level
      • A8 Cut Level
      • A9 Cut Level
    • Thermal Protective Gloves
    • New ANSI Cut Levels
  • Low Lint Products
    • Low Lint Paint Gloves
    • Low Lint Paint Gloves with Cut Protection
    • Low Lint Anti-Static Paint Glove
    • Low Lint Paint Sleeve
    • Low Lint Paint Sleeve with Cut Protection
    • Low Lint Watch Covers
  • Cut and Puncture Protection
    • Garment Systems
    • Capes, Aprons, and Pants >
      • TSG-842-1 Cape Sleeve
      • TSG-785 Cape Sleeve
      • TSG-1111-2 Cape Sleeve
      • TSG-429 Over Pants
    • Sleeves and Specialty Items
  • Welding
    • Welding Capes and Bibs
    • Welding Jackets
    • Welding Aprons and Sleeves
    • Welding Pants and Bib Overalls
  • Molten
    • Primary Layer - Aluminized
    • Secondary Layer
  • Value Add
  • Technical
  • Contact Us
    • Watch Us Make Your Garment!
  • Employment Opportunities